Preview Mode
Scanner
operation
Begin every scan in the Preview Mode. This
allows you to find the right distance to the
object, evaluate the surface, and gauge wheth-
er there are enough markers (if scanning with
markers).
It is important to find the optimal working dis-
tance between the scanner and the object. The
ideal working distance (also known as Depth of
View) depends on which set of lenses you are
using (Mini, Midi, or Maxi). For ease-of-use, the
object on the screen, in real-time, is shown in
different colors. If the surface is blue, you are
getting too far from the object. If it is red, the
scanner is in danger of being too close. The op-
timal distance is shown in green, so try to keep
the scanner at that distance to the object dur-
ing scanning. Another way to assess the correct
distance to the object is to use the white indi-
cator on the left side of the screen. The closer
you are to the object, the lower the bar will
drop. Try to keep the white bar in the middle
of the scale during scanning. Above this white
indicator, you will find the real-time frame rate
information (FPS), as well as the number of
markers visible (if in «marker» mode).
Turn on Preview Mode by
pressing this button.
To stop scanning press.
62
Drake. User manual
62
Summary of Contents for Calibry
