LFE1220-US, -EU, and -UK Laminar Flow Enclosures
Chapter 3: Installation
Rev A August 2020
Page 21
3.5.4. 2
nd
Long Side Assembly
22.
It is recommended that 2 people perform this step.
Assemble the remaining Frame Upright (E
) and Long
Lower Cross Member (F
), similarly to step
It is recommended that 2 people perform this step
) and a Short Lower Cross Member (G
). Ensure the T-slot recesses and positioning
screw are aligned as shown. Similarly to step 20, fit the Short Lower Cross Member into the uprights and tighten
the screws.20, making sure the T-slot recesses and position screw are aligned correctly.
Figure 19 Second Long Side Assembly
Summary of Contents for LFE1220-EU
Page 60: ...www thorlabs com ...