background image

15

MLS203 Series XY Scanning Stage

Chapter 7

Regulatory

7.1

Declarations Of Conformity

7.1.1

For Customers in Europe

See Section 7.3.

7.1.2

For Customers In The USA

This equipment has been tested and found to comply with the limits for a Class A

digital device, persua nt to part 15 of  the FCC rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated  in  a  commercial  environment.  This  equipment  generates,  uses  and  can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction  manual,  may  cause  harmful  interference  to  radio  communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.
Changes  or modifications  not  expressly app roved  by th e company  could void the

user’s authority to operate the equipment.

7.2

Waste Electrical and Electronic Equipment 

(WEEE) 

Directive

7.2.1

Compliance

As required by the Waste  Electrical and Electronic Equipment (WEEE)  Directive of

the European Community and the corresponding national laws, we offer all end users

in the EC the possibility to return "end of life" units without incurring disposal charges.

This offer is valid for electrical and electronic equipment

• sold after August 13th 2005 

• marked correspondingly with the crossed out "wheelie bin" logo (see Fig. 1)

• sold to a company or institute within the EC 

• currently owned by a company or institute within the EC 

• still complete, not disassembled and not contaminated

Fig. 7.1   Crossed out "wheelie bin" symbol

Summary of Contents for MLS203 Series





















Reviews: