KATflow 150
5 Commissioning
Lining
Material
Select from material list ↑↓
Thickness
1 ... 99 mm
C-speed
600 ... 6553.0 m/s
Passes
Passes
Select from list ↑↓
Display
Select channel
Channel 1, Channel 2
Select line of
display
(Top, Middle,
Bottom)
Select from unit list ↑↓
Damping
Reduces fluctuations in the display output
1 ... 255 s
Metric/Imp.
Select metric or Imperial units.
In/Output
Type
Select from list ↑↓
I Out
Analogue current output
Source
Select from list ↑↓
Off, Channel 1, Channel 2, Math 1, Math 2
System, Test
Units
Select from unit list ↑↓
Min Value
Min. process variable (PV) value that corresponds
to 0/4 mA
Max Value
Max. process variable (PV) value that corres-
ponds to 20 mA
Damping
Additional smoothing of the current output, the
higher the damping factor, 1 ... 255 s
Span
0-20mA or 4-20mA
Error
Defines output behaviour in the event of error
Select from list ↑↓
Hold (hold last value, select hold time),
3.8mA, 21.0mA
Voltage out
Source
Select from list ↑↓
Units
Select from list ↑↓
Min Value
Min. process variable (PV) value that corresponds
to 0v
Max Value
Max. process variable (PV) value that corres-
ponds to 10v
Damping
Additional smoothing of the current output, the
higher the damping factor, 1 ... 255 s
Error
Defines output behaviour in the event of error
Select from list ↑↓
Frequency out
Source
Select from list ↑↓
Units
Select from list ↑↓
Min Value
Min. process variable (PV) value that corresponds
to minimum frequency
Max Value
Max. process variable (PV) value that corres-
ponds to maximum frequency
Damping
Additional smoothing of the current output, the
higher the damping factor, 1 ... 255 s
30
