Document number: 95-127467
Thrane & Thrane A/S · Lundtoftegaardsvej 93 D · DK-2800 Kgs. Lyngby · Denmark
T +45 39 55 88 00 · F +45 39 55 88 88 · info@thrane.com · www.thrane.com
Bank: Danske Bank · Comp.reg.: 65 72 46 18 · VAT: DK-20 64 64 46
Page 5 of 5
Continued….
Connecting the LB5007 LAN box
Connection of the printer server with the LAN Box LB5007 must be done using a
crossed Ethernet cable. Alternatively, if operating in an office environment, an
Ethernet HUB can be used, in which case the HUB does the terminal-terminal
signal crossover inside.
Note: The LB5007 Lan Box is not qualified/authorized to operate directly on the
internet, so refrain from plugging it into an open internet connection. The router
to the internet would probably not allow this anyway.
The LB5007 may also be used as service box. In installations with a LB5007 the
service PC may be connected in place of the printer server during
service/configuration of the VHF equipment.
Action:
No specific action required except as stated above under “Priority”.
Thrane & Thrane
After Sales Service
Author:
JKR
Date:
07-05-2008
Checked:
DAV
Date:
07-05-2008
Approved:
DAV
Date:
07-05-2008
