THRUSH AIRCRAFT, INC – MODEL S2R-R1340 THRUSH 600
AIRCRAFT MAINTENANCE MANUAL
2-30
Effective 01/01/08
K: TAIL GEAR
(Continued)
Da
ily
50
hrs
100
hrs
400
hrs
9.
Check the centering springs for corrosion,
attachment security and correct operation.
X
L: FUSELAGE SKINS
Da
ily
50
hrs
100
hrs
400
hrs
1.
Inspect all panels and cowlings for cracks,
chaffing, paint and security of fasteners.
X
2.
Check the Camloc receptacles for corrosion, wear,
and locking action.
X
3.
Inspect cockpit enclosure skins for cracks, paint
and security.
X
M: HOPPER
Da
ily
50
hrs
100
hrs
400
hrs
1.
Inspect the hopper baffles for security and
condition.
X
2.
Check the hopper lid for condition of seal and
security of latches.
X
3.
Inspect the hopper for evidence of leaks and for
general condition.
X
4.
Check the gate for evidence of leaks and for
proper operation.
X
5.
Check the hopper vent tube for corrosion and
security.
X
6.
Check the gaskets on both the return and outlet
lines.
X
7.
Check emergency shut-off valve for leaks and
proper operation
X X
8.
Check the hopper gate handle and the push rod
for cracks around the welds. Check the condition
of the push rod boot.
X
N: WINGS
Da
ily
50
hrs
100
hrs
400
hrs
1.
Inspect the aileron brackets for cracks and
security.
X
2.
Check the boots at the aileron push rod entrance
to the wing root for condition and security.
X
