USERS MANUAL AURORA SERIES
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
5
1.2 Designated
The
THUNDER LASER AURORA SERIES is intended exclusively for laser marking using the supplied
marking software.
Materials such as metal, anodized aluminum, and several plastics can be PROcessed on the laser.
The following points should also be observed as part of the intended use:
1.The engraving process must only be performed with a perfectly adjusted machine.
2. Only mark approved materials using suitable parameters.
3. Use of the system in other areas is against the designated use. The manufacturer does not admit
liability for damage to personal and/or equipment resulting from such use.
4. The system must only be operated, maintained and repaired, by personnel that are familiar with the
designated field of use and the dangers of the machine!
5. Non-observance of the instructions for operation, maintenance and repair described in this Operation
Manual excludes any liability of the manufacturer if a defect occurs.
6. Caution when processing conductive materials (carbon fibers), Conductive dust or particles in the
ambient air might damage electrical components and lead to short circuits. Bear in mind that those
defects are not warranted.
1.3 Disposal remarks
Do not dispose the machine with domestic waste!
Electronic devices have to be disposed according to the regional directives on electronic and electric
waste disposal. In case of further questions, please ask your supplier. He might take care of proper
disposal.
