USERS MANUAL AURORA SERIES
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
11
2.3 Safety Precautions when Operating the Device
Your Thunder Laser AURORA SERIES has an integrated safety system which immediately stops the job
when the protection cover (Lid) is opened. An incomplete job will occur if the cover is opened during
operation.
Please remember the following safety precautions when working with this device:
1. CO2 Fire extinguishers should be placed near laser. Always keep a properly maintained and
inspected fire extinguisher on hand.
2. Do not store any flammable materials in the inside of the device. Particularly leftovers of
produced materials have to be removed to prevent fire hazard.
3. Please maintain free airflow around this system at all times. Do not cover the machine while in
operation.
4. Stay with the laser. Do not leave the laser unattended when it is working.
1. These lasers emit invisible radiation; safety glasses should be worn when maintaining these
machines for your protection.
2. Adjustment of the beam path must be performed only by specially trained personnel. An
improper setting can lead to uncontrolled emission of the laser radiation.
1. Do not disable limit switches or safety features as this can invalidate warranties and cause
damage to you and the machine.
2. Before processing materials the user must verify whether harmful materials can be
generated and whether the filter equipment of the exhaust system is suitable for the harmful
materials. We emphasize that it is the responsibility of the user, to consider the national and
regional threshold values for dust, fogs and gases when selecting the filters and the exhaust
system. (The values for the maximum workplace concentration must not be exceeded.)
3. PVC (polyvinyl chloride) must under no circumstances be processed with the laser.
