USERS MANUAL AURORA SERIES
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
45
6. How to set&adjust the focus length of Auto-focus
AURORA series marking machines can be equipped with 3 field lenses ( F
-
160, F-210, F-290), and the
focal lengths of different field lens es are different. After changing the field lens, the user needs to adjust
the focus of autofocus again.
AURORA 8
AURORA 8 PRO
Auto-focus software
Jhc Seriestools
Tl-tool
6.1 Jhc Serials tool
How to set the focus length of Auto-focus:
(1) First time use the auto-focusing system, connect the wire of the control board, then
connect to the computer.
How to connect the USB cable of Auto-focus board:
Find the USB cable of Auto-focus board that came with the Fiber machine.
Loosen the 6 fixing screws of the top cover of the fixed marking machine (please keep the screws),
move the top cover to the right, move it to see the auto focus plate, and connect the USB cable to the
auto focus plate “UStart” interface, the other end is connected to the computer end.
