BALANCE
It is important to balance the plane to get correct CG
before you fly.
Balance Point as indicated in each diagram.
Expo 3D
G202
Christen Eagle
Note: For the best flight performance of the Christen
Eagle, a high center of gravity is important. Following
the manual shown in Step 32 which shows the
location of battery.
11
3-1/4"~3-1/2" ( 8.5~9cm)
C.G.
3-3/4"~4" ( 9.5~10cm)
C.G.
3-1/2"~4" (9~10cm)
C.G.
LONGITUDE BALANCE
As 3D planes do a lot of hovering so it is very
important to do longitude balance to make hovering
much more stable. Try to create a small hole after the
motor and on the thrust line. Get music wire or string
then thread the wire through the hole. Make sure that
model hangs perfectly vertical as illustration. If not
then try to adjust the location of battery, receiver or
ESC to get good longitude balance.
CONGRATULATIONS
Your done, may you have many successful flights filled
with fun and lots of 3D maneuvers.
Thank you for purchasing this 3D Profile EP from
Thunder Tiger and we look forward to providing you
with other great R/C products in the near future.
ASSEMBLY / BALANCE
C.G. Must be Set on Thrust Line
C.G. is Too Low
C.G. is Correct
