background image

No.6241-F

This radio control model car is not a toy!  Before beginning assembly, please read this manual thoroughly.

本產品為高性能模型非一般玩具,組裝與操作前,請詳閱本產品說明書。

The contents are subject to change without prior notice due to product improvements and specificatrion changes.

本套件所附之零件可能跟圖示有所差異。因產品後續之設計研發或功能不斷改善之因,我們將保留產品規格變更權力,不再另行通知使用者。

1:8 SCALE NITRO-POWERD 4WD RACING TRUCK

1:8 

引擎動力四驅競賽卡車

Thunder Tiger Corporation guarantees this model kit to be free from defects in both material and workmanship. The total monetary value under 

warranty will in no case exceed the cost of the original kit purchased. This warranty does not cover any components damaged by use or modification. 

Part or parts missing from this kit must be reported within 60 days of purchase. No part or parts will be sent under warranty without proof of purchase. 

To receive part or parts under warranty, the service center must receive a proof of purchase and/or the defective part or parts. Should you find a 

defective or missing part, contact the authorized Thunder Tiger Service/Distributor nearest you. Under no circumstances can a dealer or distributor 

accept return of a kit if assembly has started.

WARRANTY 

品質保證事項

本公司對於製造過程中產生之瑕疵,負完全品質保證責任。
保證事項僅限於產品本身與隨產品所附之零配件。
品質保證不包含下列事項
因使用、組裝或調整本產品所發生之損壞。
其他所有非產品本身品質所造成之損壞。

Instruction Manual & Parts Catalogue

操作說明書及零件包型錄

Summary of Contents for 6241-F





























Reviews: