THUNDER TIGER ZT2, Instruction Manual

2

The Radio Control System

1

8

9

10

11

12

2

4

5

6

7

3

The Transmitter

Thunder Tiger ZK-2/ZT-2 Mini- Monster truck/Mini Racing Truck features with an advanced PCM FM
radio control system, including a micro servo, RS-10 Receiver/Speed Control and a ACE Jaguar 2-Ch
FM PCM pistol grip transmitter. Before operating your new radio system, please take a few minutes to
familiarize yourself with the various features of the system by reading the introduction below,

1. Transmitter Antenna:

Never operate the transmitter without extending this antenna or you may
create interference to other modeler.

2. Battery Level Indicator:

Three LED display to indicate the battery voltage level. If the Red LED
flashes, please replace the batteries.

3. Servo Reversing Switches: To reverse the servo's rotation direction at the flip of the switch. The

reversing switches are recessed into the transmitter to prevent accidental
operation.

4. Steering Trim:

Adjusts the steering in small increments or decrements to run the model
straight. 

5. Throttle Trim:

Adjusts the throttle in small increments or decrements to shift the neutral
position.

6. Steering D/R (Dual Rates): Allows you to choose between two different control sensitivities.

7. External Charging Jack:

Recharges the transmitter battery only as using a rechargeable Nicd or
Nimh battery pack.

8. Crystal:

To change the channel number your radio broadcasts.

9. Steering Wheel:

Controls the steering of the model.

10. Power Switch:

Sliding to turn the transmitter on or off.

11. Throttle Trigger:

Pulled or pushed to control the movement of the model.

12. Battery Cover:

Sliding to open the battery cover for battery replacement/installation.