background image

5

STEERING ADJUSTMENT

a. Check the radio steering functions. With the radio transmitter and receiver on, turn the steering

wheel/stick to the left. The front tires/wheels should turn left accordingly. If not, flip the steering
servo reverse switch.

b. Return the steering wheel/stick to neutral. The front tires/wheels should point straight forward. If

not, use the steering trim lever to correct it.

c. Turn the steering wheel/stick to the right. The front tires/wheels should turn right accordingly.

4

a

a

b

b

c

c

d

d

e

e

ff

BATTERY CHARGING

a. Make sure that the battery pack is completely discharged prior to charging. Discharging the

battery pack by running the electric motor until it slows down or using a discharger(Not included).

b. For best results, let the battery pack cool before charging. Heat may prevent the battery pack from

charging to full capacity and also decreases the performance of the battery.

c. Once the battery ready to be charged, first plug the AC quick charger into the outlet of AC power

source, and then connect the battery input/output harness to the charger. 

d. Continued to monitor the battery as it is being charged. As soon as the battery is fully charged,

disconnect the battery. from the charger plug(Over-charging or charging incorrectly using
inadequate chargers may cause the battery pack to become dangerously hot.)

5

a

a

b

b

c

c

Running with A.T.L function

RS module features Anti-Throttle-Lock(A-T-L)function which has been designed to prevent incorrect
operation of turning on the transmitter. The function will work in the conditions below, 

a. When turning on your vehicle, turn the transmitter on first, and your vehicle second. If the order is

reversed(Vehicle first, transmitter second), there is no throttle for operation.

b. When turning on your vehicle, leave the trigger in the natural position. If you pull the trigger too much

before switching on, the power will be disconnected temporarily for safety. 

If the A.T.L function works; turn off the vehicle first and follow the guide to turn on the radio
again!(Radio first, vehicle second!!!)

Summary of Contents for ZT2









Reviews: