background image

 

3.2 Operation Cautions 
 
 

Be careful of the safety use, do not attempt to release the connector when charging the 
battery. 

 

● Avoid the risk of collision. 
 

● Do not modify the system parameters to avoid parameters disorder. 
 

●Reset the display when error code appears. 
 
 
 
 

4. Battery: Further Information And Maintenance

 

 

1. How far can you travel with a fully charged battery? That depends on the loading 

weight, road conditions and battery capacity, however at the same time, average 

speeds can vary on distance travelled. 

2. When storing the battery for a longer time period, (e.g. during wintertime) it is 

important to place the fully charged battery on a flat surface in a dry place. 

3. Attention: The battery should be re-charged once every 2-3 month when it is not 

used.   

4.1 Keep the battery out of reach of children. 

4.2 Never try to open the battery.                                                               

4.3 If the battery is damaged because it has been dropped somewhere or because of a 

biking accident, there might be a risk of leakage. Beware of chemical burns! and 

immediately stop using the damaged battery.                                                                                     

4.4 Do not touch the battery without wearing gloves and make sure no acid touches 

your eyes.   

 

5. Charging 

 

1.

 To charge the battery with the bike, simply place the bike within reach of the 

power supply and plug it in. Note: The plug socket is located in the left of the battery.   

2. 

The battery can either be charged while on the bike or the battery can be removed 

and charged at a place of your convenience. 

 

Summary of Contents for TH-0119M












Reviews: