background image

 

3. 

The RED light indicates that it is charging and GREEN light indicates the battery 

is fully charged. (Please remove the plug from the electrical socket) Usually the 

charging time is 4-6 hours, however this is dependent on the battery capacity. 

4. 

Warning: Charging time over 10 hours is prohibited, please keep it away from high 

temperature environment and store it in a Safe cool place.   

5.

 You also remove the battery for charging. 

a. Fold the bike 

b. Turn the key 

c. Take out the battery 

 

 

6. Installation Instructions 

 

1. When opening the bikes box, remove the E-bike and use tools to cut off the package 

strings. 

2. Install front wheel: 

   

2.1 Take out the protection axle the front fork and front hub, and then take out front 

wheel. 

2.2 Take out the front disc from toolbox, install the disc on the hub of front wheel.   

Attention

: There is indicated sticker which shows the outside surface. 

2.3 Make sure the front wheel is in line with the rear wheel and proceed to install. 

(Pull the wheel upwards and insert it into the fork drop out, insert the quick release 

though the axle and tighten bolts)                                           

(

2.1)                                                                    (2.3)                                                      (2.3)   

                                                                           

                                                 

                 

                                                                             

 

(2.3)                                                            (2.3) 

 

Key 

Handle

r

 

Quick release         

Summary of Contents for TH-0119M












Reviews: