12
Grip the seat post and gently pull the chassis up
the track, not to move it, but just to take enough
pressure off the retaining bolt. Remove the bolt
from the starter track and gently slide the unit
down the track until the chassis is fully on the
mounted track and the gears have engaged.
On The Track
On The Track
Retaining Bolt
Retaining Bolt
Before loading the unit on the track, take the
power wires and lead them through the piece of
starter track the stair lift is mounted on, that way,
they won't fall down into the track.
Tip
Line up the splice bars of the starter track with the
top end of the track bolted to the staircase. Lift the
unit and insert the splice bars into the track.
Ready To Load
Ready To Load
Remove the starter track.
Install the top endcap by attaching the terminal of
the charging wire to the terminal on the inside of
the top end cap. Insert (1) T-bolt in each T-slot at
top of track, then fasten the end cap to the upper
end of the track with nuts provided.
Summary of Contents for Citia BOS
Page 21: ...21 I TROUBLESHOOTING FLOWCHART WHEN LIFT WON T RUN ...
Page 22: ...22 ...
