MODEL 1601 SERIES COFFEE BREWER
COMPONENT MAINTENANCE MANUAL
WITH ILLUSTRATED PARTS LIST
25-30-27
Page
4
September 1, 2005
5. Storage Instructions
A. Preparation for Storage
(1) Ensure that all liquids have been drained from the coffee brewer and
components to prevent possible damage if the unit is exposed to freezing
temperatures.
(2) Store the coffee brewer upright in a clean, dry location where the unit will not
be subject to dents or other damage.
(3) Whenever possible, the unit should be stored in the shipping or packing
container originally provided by the manufacturer.
NOTE: Inserts may be stacked in accordance with standard warehouse
practices.
(4) If inserts are to be stacked, a separator of ¼ inch plywood, or similar
protective device, is to be placed between the units to insure against damage
to the finish or component parts.
B. Short Duration Storage
NOTE: No special protection is required if the units are to be stored less than
three months.
(1) If units are stored in excess of thirty days, complete test procedures should
be performed prior to placing the unit in service.
C. Extended Duration Storage
Wrap units in water repellant material (Federal Spec. VV-P-271 or equivalent) and
enclose silica gel packages to absorb moisture and retard corrosion.
