MODEL 1601 SERIES COFFEE BREWER
COMPONENT MAINTENANCE MANUAL
WITH ILLUSTRATED PARTS LIST
25-30-27
Page
104
September 1, 2005
Fault
Probable Cause
Effectivity
(3) Carafe overflows
during brew cycle.
Carafe can
only
overflow due to
overfilling water tank. Recommend
that carafe be used to fill the tank. Do
not add water to the water tank during
a brew cycle. Verify that carafe is
empty prior to beginning brew cycle.
All
(4) Brew time is longer
than expected
(a) Unit has built up scale/mineral
deposits, which are constricting
flow. Clean unit in accordance
with cleaning section of this
manual.
(b) A heater element is defective.
Return to TIA for repair or
replace heater element.
(c) Water and/or unit was very cold
when starting brew. The water
took longer to heat resulting in a
longer brew time.
All
(5) ON/OFF switch is
ON but unit will not
brew.
(a) The power relay is defective.
(b) Overheat thermostat has tripped.
All
(6) Power Indicator on
ON/OFF switch does
not light. Brewer
works otherwise.
Indicator lamp in switch is defective.
Replace switch.
500-0521-01
500-0521-02
500-0619-01
500-0619-02
(7) When filling reservoir
for the second or
subsequent pots of
coffee, a puff of
steam emits from the
brew head.
Heater block is still warm enough to
“percolate” coffee. After first pot of
coffee, turn power switch to OFF and
allow heater block to cool before filling
tank for next pot.
All
(8) Brewbasket
overflows
Incorrect sized coffee filter being used
or too much coffee is being used.
All