background image

The products are manufactured by Zhejiang Tianchen 

Intelligence & Technology Co., Ltd.

www.tianchen-cn.com

Thank you for purchasing our product.   

You will have and enjoy the extra free time while using 

our robot lawn mower to mow your lawn. You will be  

impressed with your lawn's appearance and best of 

  

 

IMPORTANT

!  

Robot

 

lawn

 

mower

 

can

 

be

 

dangerous

 

if

 

incorrectly

 

used

!

WARNING

The following pages contain important safety and 

 

Carefully read and review

instructions in this manual. 
all safety instructions, warnings and cautions contained 
in this manual.

Failure to read and follow these instructions, warnings 
and cautions statements may result in severe injury or

 death to persons and pets or  damage to personal 

all, Tianchen robot  did it for you.

1. INTRODUCTION AND SAFETY

1. INTRODUCTION AND SAFETY

1.1 Introduction

T

. he robot mower may be used only by those who know
how to operate it after reading and understanding the
instructions in this manual.
Model: S510
CE, RoHs approved.

operating instructions. Please read and follow all 

property. It’s not permitted to modify the original design 

Product, product specifications and this document are
subject to change without notice. All other trademarks
are property of their respective owners.

1. INTRODUCTION AND SAFETY

1. INTRODUCTION AND SAFETY

1. INTRODUCTION AND SAFETY

IMPORTANT

  

INFORMATION

Read

 

through

 

the

 

Operators

 

Manual

carefully

 

and

  

understand

 

the

  

content

 

before

using

 

your

  

Robot

.

1.2 Symbols on Mower

These symbols can be found in the mower. Study them
carefully so you understand their significance.

1. The symbol is pasted on the top cover, 
Please read the means carefully before use 
 the appliance. 

1. WARNING-this is a dangerous power tool. Use 
care when operating and follow all safety 
instructions and warnings.

2. Read the owners/operating manual carefully 
and follow all safety instructions before operating 
the machine.

3. Objects can be thrown from mower while 
operating, keep a safe distance from the machine 
when operating, take caution.

4. Keep children, pets and bystanders away from 
mower when operating.

5. WARNING-Operate the disabling device before 
working on or lifting the machine.

6. Never use a high-pressure washer or even 
running water to clean the mower.

7. Sharp rotating blades. Keep hands and feet 
away and do not attempt to lift mower from this 
area.

8. WARNING-Do not ride on the machine.

    2. Handle symbol.

     

     Always lift the mower by Handle.

                                               

WARNING

Severe injury or death may cause
if incorrectly lift the mower. 

Carry the mower by the handle at the rear under 
the mower. Carry the mower with the blade device  
away from the body.

    3. Specifications symbol

Pasted on mower

Pasted on charging station

: Waste electrical products should not be disposed

 

waste. Please recycle where 

 of as household 

 

Authority or 

facilities exist. Check with your Local  

ADDRESS

XX

                      Enter XX to mower, in  order to match the communication

                      between charging station and robot lawn mower.

Taizhou

 

Tianchen Intelligence &Electrics Co,Ltd 

Product name: Robot lawn mower 
Model: XXXXX       IPX4
Input: XXX V  --- 2A    85W    

    

20XX

Made in China    

S.N.:XXXXXXXXXXX 

RoHS

S.N.: XXXX     XX       XX     XXX

year

month

date number

Product name: Robot lawn mower 
Model: S510         IP55
Input: 29.4 V        2A

    85

W

         

   

Made in China    

R

O

HS  

S.N.:XXXXXXXXXXXS510   

Address:XX

Product name: Robot lawn mower 
Model: S510         IP55
Input: 29.4 V        2A
Ouput  29.4 

    

2A        

    

:

V

Made in China    

R

O

HS  

Zhejiang Tianchen Intelligence & Technology Co., Ltd 

Zhejiang Tianchen Intelligence & Technology Co., Ltd 

 retailer for recycling advice.

of robot. All modifications are made at your own risk. 

1 2

0

5

4

6

7 8 9

HANDLE

HANDLE

- 1 -

Summary of Contents for ROBOT MOWER






















Reviews: