background image

1. INTRODUCTION AND SAFETY

This label is pasted on charging station, please make 

sure to position this side towards lawn interior. Failure
to do may result in damage to property or persons.

DANGER! Sharp rotating

 blade. Keep hands and feet

 

injury can

 away. Serious 

 

4. Charging station symbol.

5. Warning symbol.

 occur.

1.3 Symbols in the User Manual

These symbols can be found in this user manual.

A warning box indicates a risk of personal injury exist. 

An information box indicates a risk of material damage
exist, especially when the stated instructions are not 
followed. The box is also used where there is a risk of 

WARNING

xxxxxxxxxxxxxxxxxxxxxxxxx.

IMPORTANT INFORMATION

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.

user error.

 1.4 Safety instructions

-  Read the owners/operation manual carefully and    
   

and warning instructions.

follow all the safety 

-  This machine has sharp rotation blades! Never allow 

   

operate unattended; keep bystanders, 

the mower to 

   

mower when in operation.

children and pets away from 

-  Never allow anyone to ride or sit on mower.

-  Never allow anyone or person who is not familiar with 

   

of the mower to operate the mower.

the safe operation 

-  Keep hands and feet away from the cutting blades
   and 

parts.

other moving 

-  Never attempt to service or adjust the mower while it 

- Inspect and clear the mowing area of all debris (toys, 

   

items of clothing, anything with a height 

tree branches, 

   

mower.

less than 6cm) before operating the 

- Never raise the mower or attempt to inspect the 

   

is operating.

blades while the mower 

- Always turn off the power before lifting the mower or 

   

adjustment.

attempting any 

- When operating the mower in manual mode, maintain  

   

wear proper foot apparel.

- Do not operate the mower on slopes greater than 30 

  

a firm footing is not possible.

   device is damaged or inoperable. 

- Do not attempt to disable or defeat any safety feature

  

is in operation.

   

from behind or around the mower and 

a safe distance 

   

manual operation on slopes where

degrees or use it in 

- Do not operate the mower if any safety feature or 

   or device.

- Use heavy gloves when inspecting or servicing the 

- Wear eye protection and use gloves when installing 

   

driving the wire stakes/pegs. Firmly 

the virtual wire and 

   

wire from becoming

drive all pegs in order to keep the 

- Do not use the charging station power supply with an

- Use only the original equipment power pack and power

   

with this mower.

 supply/charger 

- Do not use the power supply/charger if the cord has

- Do not place metal objects in the area of the charging

  

 charging station.

 sheets on the

- Do not place metal objects across the charging heads

- Do no spray water directly into the docking area of the 

   

or onto the control panel on charging 

charging station 

- The mower has sharp rotating blades! Please care the 

   

mowing, in case of serious injury occur.

mower when it is 

- Keep the lawn mower in perfect operating conditions 

   

maintenance procedures outlined 

by performing the 

   

maintenance

 

by the manufacturer. Good 

 guarantees

  better performance and longer service life.

- In order not to irreversibly damage electric and 

   

wash the robot with water jets

electronic parts, do not 

   

partially or 

 at a high pressure and do not plunge it 

- It is absolutely forbidden to use the robot in explosive

   

environments.

 and flammable 

- The operator or user is responsible for accidents or 

  

other people or their property.

hazards occurring to 

   blades.

    a tripping hazard.

   extension cord.

   become damaged.

   of the mower.

   station.

    thoroughly in water, as it is not watertight.

- Fill up all small holes and even all small mounds inside

working area. It’s to keep the robot with perfect operating.

CAUTION!

Position this side of the Charging Station

towards lawn interior.

DANGER

- 2 -

Summary of Contents for ROBOT MOWER






















Reviews: