2. PRESENTATION
2. PRESENTATION
This chapter contains information you should be aware of before placing the installation.
1
Clamshell:
Open it to adjust cutting height
2
Adjusting knob:
3
4
5
Ultrasonic sensor
6
Charging head
7
Power button
8
Emergency switch on control panel:
Press it to turn off the mower.
9
9
10
Blade
11
Blade shield
Home button
Press it when the mower is on,
14
15
Power terminal
16
Virtual wire terminal
17
Copper sheet
18
Charger
19
Virtual wire (100m):
Used to mark mowing area and
create a virtual wall for the mower.
20
Virtual wire connectors (10pcs):
Used to connect virtual wire.
21
Pegs (100pcs):
Used to fix the virtual wire to the
ground around the lawn perimeter
and around obstacles.
22
Stakes (4pcs):
Used to fix the charging station to
the ground.
23
24
25
Remote control battery (2pcs)
Remote control (1pc)
Handle (Touch sensor)
Touch it when it’s working,
Mower stops at once.
Rotate the adjusting knob to adjust
the cutting height from 2.5-6cm.
Hole for stake
Blade for replacement (1pc)
it goes back to charging station
Inner hexagon spanner (1pc)
2
6
automatically.
English user manual
2
7
12
Virtual wire light
Colorless: in good connecting
Red: Broken wire/ idle
13
Charging light
Red: charging
Green: full charged / idle.
Consumable parts:
1. Blade
2. Virtual wire
3. Virtual wire connectors
4. Pegs
5. Stakes
6. Remote control battery
7. Inner hexagon spanner
8
6
7
2.1 What’s in box
2
3
5
4
1
9
10
9
12
13
11
16
15
14
17
18
20
21
22
23
2
4
19
25
2
6
2
7
or turn on the power button.
Rain sensors
- 3 -
8. Rear running wheels
9. Front wheels
