background image

 

 

LIMITED WARRANTY 

 

Tiandy Tech guarantees two (2) year repair at no charge and lift-time maintenance at 
prevailing rate from the date of delivery. 

 

Tiandy Tech series products are warranted to be free from defects in materials or 
workmanship for one year from the date of retail purchase. We reserve the final right to 
judge the malfunction of the products. 

 

What is not covered by this warranty: 

 

  Over one-year warranty period 

 

  No warranty maintenance for appearance FDilure 

 

  Damage incurred in transportation, loading & unloading or carrying. 

 

  Damage resulting from any product modification, alteration or adjustment not 

authorized by Tiandy Tech 

 

 Damage from misuse, abuse, accident and unsuitable physical and operating 

environment.

 

 

  Maintenance of the accessories such as fuse, one-off battery etc.

 

 

  Damage from acts of God such as fire, earthquake, lightning, flood etc.

 

 
Tiandy Tech reserves the right of final interpretation and modification to the above items. 
All the warranty information stated above is subject to change without notice.

 

 
 

 
 

 

 

 

 

 

 

                         

 

Summary of Contents for TC-FD1116R Series











Reviews: