Bond 2
User Manual
Page 3 / 30
1.1. Installation location
Leave sufficient space around the appliance of at least 5 cm from any wall/obstacle to ensure
proper ventilation and prevent the appliance from overheating.
The following places are not suitable installation locations for the appliance:
•
An unstable location
•
A location near a heat source or in direct sunlight.
•
In a wet or dusty environment
1.2. Warning
To prevent suffering an electrical shock or another accident, do not operate the appliance in a
rainy or humid environment.
1.3. Cleaning and maintenance
Use a soft cloth or cotton dipped in a neutral solution for cleaning the surface of appliances. Do
not use the type of cloth that you use for washing dishes or aggressive chemical agents.
1.4. Before moving the appliance
Before moving the appliance to a different location, please take the disc out of the appliance
so that the disc and appliance will not be damaged.
1.5. Storm
If the appliance is not working properly during a storm, please disconnect the plug from the
power socket and reinsert it after a minute.
1.6. Do not drop small items or a liquid into the appliance
In the event that you find small items or a liquid inside the appliance, you see smoke or smell
an odour, immediately disconnect the appliance from the power grid. Send the appliance to an
authorised service centre.
1.7. Repacking the appliance
When sending the appliance by a transport company, use the original packaging to prevent its
damage during transport.
Summary of Contents for Bond 2
Page 1: ...Bond 2 User Manual...
