Bond 2
User Manual
Page 8 / 30
3.4. Initial setup steps
•
Locate the 3.5mm to 3.5mm jack cable and insert one end into the Line Out port of the
Bond 2. Then insert the other end into the 3.5mm Line In port or headphone port on an
amplifier/speaker.
•
Locate the Micro USB power cable and insert the small end into the power input on the
rear panel.
•
Then insert the large USB end of the cable into a plug that contains a USB port and plug
into a socket.
•
Turn on the power switch at the socket and you should hear “Power on – Wi-Fi mode” if
the Bond 2 is connected properly to your amp/speakers.
Note:
Some amplifiers and speakers won’t have a 3.5mm jack port or headphone port.
Therefore, you will need to purchase a 3.5mm to RCA cable if this is the case.
3.5. App download
The TIBO app helps you get setup for the first time and helps get the most out of your speaker’s
functions. The app is compatible with iOS and Android smartphones and can be downloaded
for free on Google Play or in the App Store. Type “TIBO” into the search bar or scan the QR
the appropriate codes below:
Google Play Store
App Store
Scan QR code:
Android
IOS
With the TIBO app you can:
•
Browse and connect to over 15000 internet radio stations
•
Select a sound source
•
Manage Multi Mode groups
•
Set up, modify, and play your pre-sets
•
Check what song or other media is currently playing
•
Adjust individual and multi-room volume settings
•
Rename your speaker
•
Adjust panning
Summary of Contents for Bond 2
Page 1: ...Bond 2 User Manual...
