SIA50
User Manual
Page
28 / 31
7. Optical mode
•
Whilst the SIA50 is turned off, connect an optical cable to the optical in port at
the rear of the SIA50 and connect the other end of the cable to a source with
an optical output.
•
Turn on your SIA50 and press the mode button until Optical mode is selected.
SIA50 will respond by saying “Optical mode.”
•
You can now play music to the SIA50 via your source.
8. Connecting a subwoofer
•
For this you will need an RCA to RCA cable. This can be either a stereo or a
mono RCA lead.
•
If the subwoofer you’re using has a mono input, use the mono RCA lead to
connect.
•
If the subwoofer you’re using has a stereo input, use the stereo RCA lead and
connect the white end to the SIA50 and match the opposite white and red
ends with the subwoofer.
Summary of Contents for SIA50
Page 1: ...SIA50 User Manual ...