3. Enable the Bluetooth setting on your source
and your source will then automatically search
for nearby Bluetooth devices.
4. When ‘TIBO Smart Amp’ appears on your list
‘available devices’ on you source, click to pair
your source with the Smart Amp. When
connected, the speaker will respond saying
“Bluetooth connected.”
5. You can now play music to the Smart Amp via
your device.
•
Aux In mode
1. Whilst the Smart Amp is turned off, connect a
3.5mm jack cable to the ‘Line in’ port at the
rear of the speaker and the other end of the
cable to your Android/iOS device. This is to
avoid speaker pop when the speaker is turned
on.
2. Hold the power/mode button to turn on. If
performed correctly, speaker will respond by
saying “Power on.” The speaker will then tell
you what mode is currently activated. E.g. Wi-
Fi mode.
3. Short press the mode button until the speaker
responds saying “Aux In mode.” The mode
light will also turn green.
4. You can now play music to the Smart Amp via
your source.
Summary of Contents for Smart Amp
Page 1: ...Smart Amp User Manual...
