3. Enable the Bluetooth setting on your source
and your source will then automatically search
for nearby Bluetooth devices.
4. When ‘TIBO Streamer‘ appears on your list
‘available devices’ on you source, click to pair
your source with the Streamer. When
connected, the speaker will respond saying
“Bluetooth connected.”
5. You can now play music to the Streamer via
your device.
•
Line In mode
1. Whilst the Streamer is turned off, connect an
RCA cable to the ‘Line In’ port at the rear of
the speaker and the other end of the cable to
your source. This is to avoid speaker pop
when the Streamer is turned on.
2. Turn on the Streamer via the power switch on
the back of the Streamer. If performed
correctly, speaker will respond by saying
“Power on.” The speaker will then tell you what
mode is currently activated. E.g. Wi-Fi mode.
3. Short press the mode button on either the
remote or the Streamer until it responds saying
“Line In mode.” The mode light will also turn
green.
4. You can now play music to the Streamer via
your source.
