19
Turn it back on
RADIO DATA SYSTEM
RADIO DATA SYSTEM (RDS)
RDS is a method for the transmission of additional
information from local Radio Stations. It can only be
operated in FM mode. For example, name of the sta-
tion broadcasting, name of the program or the type of
program will be shown on the multi-function display.
It functions only when the local broadcasting stations
have the RDS transmission and the signal is strong
enough.
Press
“DISPLAY”
on remote control, there are func-
tions for PS, PTY, CT and RT.
a) PS (Program Service Name)
Press
“DISPLAY”
on remote control until the current
station name appears.
Note: “NO PS”
will be shown if the signal from local
radio station is not strong enough or no such service.
b) PTY (Program Type)
Press
”DISPLAY”
on remote control until the current
name type of the program appears.
Note: “NO PTY”
will be shown if the signal from local
radio station is not strong enough or no such service.
c) CT (Clock - Time)
Press
“DISPLAY”
on remote control until the current
time from Radio Station appears. e.g. 15:30.
Note:
1.
The Clock
- Time will be only transmitted from lo-
cal radio station once a minute, so you need to wait
for less than 1 minute to show the result.
2.
“NO CT”
will be shown if the signal from local ra-
dio station is not strong enough or no such service.
d) RT (Radiotext)
Press
“DISPLAY”
on remote control until some Text
messages appears.
Note: “NO RT”
will be shown if the signal from local
radio station is not strong enough or no such service.
PTY SEARCH (Program Type Search)
1. Press the
“PTY”
on remote control,
“PTY SEL”
ash on the display.
2. Press
/-
to choose the program type, for
example,
NEWS, SPORT, etc...
3. Press
“PTY”
again once you choose the
program type.
4. When the type of program tuned in, it will stop
searching, otherwise,
“NO FOUND”
will appear.
APS (Auto Program Search)
Pressing the
“APS”
on remote control, it will search
the available stations.The searched stations will be
memorised in the respective band memory up to
maximum 20 memories.
Note:
Weak station may also be stored in memory, so
manual memory presetting may be needed in order to
have better reception.
