28
Turn it back on
OSD MENU
If a digital source is selected TI 1000 HC will be pro-
cessing either LPCM stereo (from the digital outputs
of a CD player for instance) or a Stereo downmix of
DD or DTS material (from the digital output of a DVD
player for instance).
6. Other modes
Analogue Stereo Direct
Selects the analogue inputs for the current source di-
rectly with no A/D conversion, DSP processing, Bass/
Treble or subwoofer channel active. Provides the very
this mode TI 1000 HC is acting just like a normal Hi-Fi
er.
Multi Channel PCM
Some playback devices (in particular Blu-ray play-
ers) are able to decode some of the above formats
themselves internally and then output the decoded
audio as Multi Channel PCM to TI 1000 HC. In addi-
tion Blu-ray disks can support native unencoded Multi
Channel PCM soundtracks (of up to 8 channels) on
the disc itself. In either case if your player can output
these over HDMI TI 1000 HC is able to receive them in
Multi-Channel PCM mode.
7. Dolby/ DTS Setup
Dynamic range control
This setting controls the dynamic range of Dolby
Digital movie soundtracks by compressing the audio
to limit the difference in level between loud and quiet
passages in the movie.
This can be a useful feature when watching movies
late at night for instance. Three settings are possible:
Auto
- Compression is always applied for Dolby Digital
and Dolby Digital Plus soundtracks. The application
and amount of compression to Dolby True HD sound-
tracks is dictated by the soundtrack itself.
Off
- No Compression. (normal full dynamic range
playback).
On
- Compression is always applied for all Dolby
soundtracks. (reduced dynamic range playback).
DRC can be accessed by the Dynamic button on the
remote control, the current setting is displayed, press-
ing the button again moves to the next setting. When
1000 HC will save the settings and exit the menu.
processing (or post-processing) in Music mode only.
Movie and Game modes where available are preset
cation to match the encoding or
affect in these modes.
Panorama mode
- A Prologic II mode that extends the
front Stereo image to the surround sound speakers
for a more enveloping experience. This mode can be
either On or Off.
Centre width
- Allows gradual adjustment of the
centre image from being produced only by the Centre
speaker (Setting 0) through levels of being spread be-
tween the centre channel and Left and Right speakers
speakers only (Phantom Centre, Setting 5). Useful in
eld for best
integration of the 3 speakers. Best tuned by ear.
Dimension
eld to be gradually
shifted from the front of the room to the back to suit
taste, speaker positioning and size of room. Setting 0
has the image furthest forward, 6 furthest back.
All three adjustments are a matter of personal prefer-
ence, experiment for the settings that you prefer when
you are using PLII decoding.
8. OSD Setup Menu
