7
Turn it back on
Connecting to the mains
By using the provided remote control, the receiver can be controlled from your listening position. To use the
remote control, point it at the REMOTE SENSOR window of the receiver.
Notes:
-
Even if the remote control is operated within the effective range, remote control operation may be impossible if
there are any obstacles between the unit and the remote control.
-
If the remote control is operated near other appliance which generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may operate incorrectly.
-
The power is turned on/off (standby) by pressing the POWER button on the remote control in standby mode.
Precautions concerning batteries:
-
Be sure to insert the batteries with correct positive (+) and negative (-) polarities.
-
Use batteries of the same type. Never use different types of batteries together.
-
Rechargeable and non-rechargeable batteries can be used. Refer to the precautions on their labels.
-
When the remote control is not to be used for a long time (more than a month), remove the batteries from the
remote control to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment
and replace the batteries with new ones.
-
Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fi re.
REMOTE CONTROL OPERATION RANGE
Use the remote control within a range of about 7 meters (23 feet) and the angles of up to 30 degrees aiming at
the remote sensor.
Battery installation
1. Remove the battery compartment cover.
2. Insert two “AAA” dry batteries. Make sure that the batteries are inserted with
their positive “+” and negative “-” poles positioned correctly.
3. Close the cover until it clicks.
If the distance required between the remote control and main unit decreases, the
batteries are exhausted. In this case, replace the batteries with new one.
REMOTE CONTROL
