17
Turn it back on
Load a disc
If you want to play a disc, you must load a CD. You do this by pressing the eject button the remote control or on
the front panel of the CD player. When the disc has been read, the display will show the number of tracks on the
disc and the total playback time.
If there is no disc in the tray, the message No Disc will be displayed. If the unit has trouble reading a disc, you
must check if the disc is clean and free from dirt and scratches. If the disc is still not playing, you must contact
your dealer.
Play
Press the Play/Pause button on the remote control or on the front panel once to start playback. The counter on
the left side of the display will start to count upwards.
CD 12-12-59:47
CD 12-12-59:47
NO DISC
CD-PLAYER
Pause a disc
Press the Play/Pause button once more to stop playback. The counter on the left side of the display will start to
blink. To continue playback, press the Play/Pause button again.
Stop/Clear
To stop playback completely press Stop button once. The display will again display the number of tracks on
the disc and the total playback time. When the stop button is pressed all previous programming settings will be
deleted.