19
Turn it back on
Connecting to amplifi er
The TI420 loudspeakers are supplied with high quality multi strand speaker cables, colour coded to assist
checking polarity. Always switch OFF your amplifi er before making any connections or adjustments to the
system. Wire the right-hand channel cable so that the positive (RED) terminal of your loudspeaker is connected
to the positive (RED) on your amplifi er, The negative (BLACK) terminal of your loudspeaker is connected to the
negative (BLACK) terminal on your amplifi er. Repeat the instructions for the left-hand channel. Do NOT connect
more than one loudspeaker to one terminal on your amplifi er.
Loudspeakers positioning
Ideally the TI420 loudspeakers should be positioned at least 50 cm from a rear wall, 1 meter from a side wall
and at least 2 metres apart. The space between the two loudspeakers and the distance form the listeners
are important. If loudspeakers are placed too close together or too far apart, stereo images will not be fully
developed. In average living rooms, speaker distance between 2 and 4 metres will usually give the best results.
The listeners distance from the loudspeakers should be at least equal to and preferably greater than the distance
between the loudspeakers. Tests should be made with both speech and music before deciding upon fi nal
locations.
2 m
2.5 m
Lef
t
Righ
t
TI 420 BT/AMPLIFIER
LOUDSPEAKERS
