3. Insert the appropriate mains cable into the rear of
the Amp and turn on your power source.
4. Turn on the power switch at the rear of the Amp.
The ring around the central dial of the Amp should
light up a dim red colour. This means it is in standby
mode.
5. Press and hold the dial on the front panel of Amp
or press the power on button on the remote control
to turn on the Amp.
6. When turned on, you should hear the Amp say
“Power on” and it will also tell you which input mode
is currently activated.
Summary of Contents for TI435 AMP
Page 1: ...TI435 AMP User Manual ...
