•
Line In mode
1. Whilst the TI435 is turned off, connect an RCA
cable to the Line In port on the rear panel and
the other end of the cable to your Android/iOS
device. This is to avoid speaker pop when the
TI435 is turned on.
2. Turn on the amp by pressing the power switch
on the rear panel. If performed correctly, amp
will respond by saying “Power on.” The amp
will then tell you what mode is currently
activated. E.g. Line In mode.
3. Short press the mode button on either the amp
itself or the remote control until the amp
responds saying “Line In mode”
4. You can now play music to the amp via your
source.
•
Tuner mode
1. Whilst the TI435 is turned off, connect an RCA
cable to the Tuner port on the rear panel and
the other end of the cable to your DAB Tuner.
This is to avoid speaker pop when the TI435 is
turned on.
2. Turn on the amp by pressing the power switch
on the rear panel. If performed correctly, amp
will respond by saying “Power on.” The amp
Summary of Contents for TI435 AMP
Page 1: ...TI435 AMP User Manual ...
