will then tell you what mode is currently
activated. E.g. Line In mode.
3. Short press the mode button on either the amp
itself or the remote control until the amp
responds saying “Tuner mode.”
4. You can now play music to the amp via your
source.
•
CD mode
1. Whilst the TI435 is turned off, connect an RCA
cable to the CD port on the rear panel and the
other end of the cable to your CD Player. This
is to avoid speaker pop when the TI435 is
turned on.
2. Turn on the amp by pressing the power switch
on the rear panel. If performed correctly, amp
will respond by saying “Power on.” The amp
will then tell you what mode is currently
activated. E.g. Line In mode.
3. Short press the mode button on either the amp
itself or the remote control until the amp
responds saying “CD mode.”
4. You can now play music to the amp via your
source.
Summary of Contents for TI435 AMP
Page 1: ...TI435 AMP User Manual ...
