Synergy Controller Technical Manual, Revision H
Page 278
TCP/IP
To communicate over TCP/IP, connect your PC to your LAN. You must also connect your chamber to your
LAN. The Synergy Controller either requires a DHCP router to dynamically assign it an IP address or your
network administrator can assign you an available Static IP Address.
Once assigned, the IP Address will appear in the
Ethernet folder of the Synergy Controller.
Note: The numbers shown are examples only.
Set SimpleComm’s IP Address to the address
displayed on the Synergy Controller. The port for
the chamber is 5000; always set SimpleComm’s
port to 5000.
To enable the TCP/IP communications on the
chamber, go to the TCP/IP Server folder and set it
to Enabled.
Once the settings are complete, press SimpleComm’s Connect button. Upon successful connections the
status label will read “Socket Connected”.
Sending and Receiving Commands
To send individual commands using the SimpleComm utility first confirm that you are connected. Next type
the command into the Command text box, then either hit Enter or press the Send button. The reply from
the chamber will be displayed in the Response text box. All query commands should be preceded by a “?”
and all set commands are preceded with an “=”.
Summary of Contents for Synergy Compact
