35
VAULT DOORS:
The Acceptor/Drop Vault has been open too long,
please close it:
1) This error message is displayed when the unit detects a door
has been unlocked for unusually long period.
2) Close and lock the appropriate door.
3)
Select “Cancel”. A prompt to enter the Manager code will be
displayed. Entering the Manager code will temporarily return
to the Main screen. The error message will return after 5
minutes if the door remains unlocked.
NOTE: After the Manager Code entry has been used to bypass the
error message 3 times, the error will not return.
Display indicates Vault Door is ready to open
but the handle cannot be moved to the unlocked
position
1) Insure the handle is positioned FULLY to the right (Drop and
Mailbox Vaults), and attempt to open the vault again.
2) Turn the Power Switch OFF, wait 30 seconds, then turn the
Power Switch back ON - attempt opening again.
To cancel a door opening that is in progress
X
Performing a “Secure All Vaults” will stop all door opening
procedures that are in progress.
1)
Navigate to the “Open Vault” Menu.
Log In > (enter code) > Open Vault
2)
Select “Secure All Vaults”.
3)
The Display will show “All vaults have been secured”.
Troubleshooting
Summary of Contents for TACC-VI
Page 1: ...450 0447 001 Rev C TACC VI...
