D
L ine Queuing
When all lines in a particular line group are busy (e.g., all the WATS lines),
you can use Line Queuing to ring your phone as soon as a line in the
group becomes availa ble.
To queue for an outside line:
1 .
Lift handset.
2. Press HOLD.
3.
Dial queue group num ber
(
1 -4)
assigned to the line you
desire.
4.
Hang up.
Hear dial tone.
See Outside Lines Chart for
queue group num bers.
H O LD flashes and dial tone stops
to indicate queue is accepted.
NOTE:
When you queue for an outside line, the last outside num ber you
manually dialed is erased from your phone's memory. (See Last Num ber
Dialed.)
To answer when Line
Queuing rings:
1 .
Lift handset.
2. Press flashing Line key.
HOLD extinguishes and Line key
flashes.
You hear dial tone on the line,
and can place your call. If you
normally dial an access code for
this line, dial it before you place
the call.
Or,
you may hear dial tone on the
line by just lifting the handset.
(See Checklist.)
26
01750-MUB-i02-1986-04-26.jpg Scanned by Frank Harrell, !Cowboy Frank) Castle Rock, Colorado Oct 18,2012 13:38:45
