Section 33: Functions Tab
T
ieline
Page 288
T E C H N O L O G Y
Category Description
Control
Keys
Allows you to select whether User Functions will be
activated by a
SOFTKEY
or
HOTKEY
.
Connection
Events
Allows you to select if User Functions will be initiated by
connection functions of the codec.
Function
Keys
Allows you to select whether User Functions will be
activated by the
FUNCTION KEYS
(
F1 and F2
).
Pressing
the
F1
or
F2
keys and a number (
0-9
) on the keypad of a
codec activates these User Functions.
External
Inputs
Allows you to select whether User Functions will be
activated by CAN 8+8 expansion box sources plugged
into the
CAN
port on the rear panel of the codec.
Internal
Inputs
Allows you to select whether User Functions will be
activated by sources which are plugged into
Control Ports
1 and 2
on the rear panel of the codec.
System
Events
Allows you to select whether a system event, such as AES
sync loss will activate a User Function. (TLR300B only)
Table 13: Functions Menu - Category Menu
Once you have decided which
Category
will be used to activate a User
Function you will need to specify the
Source
of the
Category
you select. The
relationship between a
Category
and its
Source
is shown in the table in the
next section of this manual.
33.2.2.
Source Menu
As mentioned previously,
Source
allows you to program how you wish to
activate a User Function for each
Category
. It is simply a matter of specifying
which
FUNCTION KEY, SOFTKEY, HOTKEY,
internal input, external input
or connection event will actually be used to execute a User Function.
Table 14: Functions Menu - Source Menu
Category
Source
Control
Keys
Selects whether a
SOFTKEY
or
HOTKEY (
or the
PPM
SELECT
button on the TLR300
COMMANDER
G
3
2RU
front panel or GUI) will activate a User Function.
Connection
Events
Selects a method of connection you want to use to activate
a User Function - POTS, ISDN, IP or GSM.
Function
Keys
Selects whether the
F1
or the
F2 FUNCTION KEYS
will be
used to activate a User Function. An Item key also needs
to be pressed. For example
F1
and a number between
0
and
9
on the keypad.
External
Inputs
Up to four relay boxes with eight relays can be connected
to the codec. The relay box you wish to use in activating a
User Function is selectable in this menu. The selections
are named
Modules 1 - 4
.
Internal
Inputs
This section is ‘grayed-out’ as it is only necessary to select
the relevant input with the
Key
menu.
System
Events
This section is ‘grayed-out’ as it is only necessary to select
the relevant input with the
Key
menu. (TLR300B only)
