Section 38: Phonebook Editor
T
ieline
Page 340
T E C H N O L O G Y
Select
Yes
if you wish to continue and change the profile or select
No
if you
wish to exit the menu. If you select
Yes
by pressing
SOFTKEY 2
, the codec
will disconnect any current calls, load the new profile settings and all you
need to do is press
ENTER/DIAL
on the codec to dial and connect with the
new profile’s settings.
Important note:
We highly recommend that you create your own custom
profiles for speed dial purposes, particularly if you require many profiles for
different situations.
It is also possible to use speed dial with manual default profiles but if you do
this we recommend you do not enter the number into the
Connection Setup
page of the
Profile Editor.
If you do, this will limit the scope of use for these
profiles. This is not recommended. Instead, we recommend that you program
the dialing number into the
Phonebook Editor
and select the manual default
profile next to the number. An example of how to program manual default
profiles in this way is displayed in the next section.
Alternatively, if you wish to use the settings of a particular manual default
profile and save it as a new profile, simply save the profile’s settings with its
own unique name. This is simple to do and is fully explained in the section of
each codec’s main manual titled “Creating a New Profile”.
38.4.
Programming Profiles Using ToolBox
Following is an image of the
Phonebook Editor
in
Tool
Box
software. This
software can be used to program numbers and profiles into your codec easily.
Figure 106: Phonebook Editor in ToolBox
