Section 10: POTS Operation and Usage Tips
T
ieline
Page 81
T E C H N O L O G Y
Figure 27: Audio Routed to Analog Outputs
10.15.1.
Monitoring when POTS Voice is Routed to Analog Outputs
When
Route Phone In to Out
is enabled, audio is
sent to the
Return
section of the
Mix (Send/Ret
urn) Pan Matrix.
As a result, the
Decoders
and
the POTS voice (
Phone
) audio is monitored via
Return
and the other inputs can be controlled
with the
BALANCE
knob via
Send
.
10.16.
POTS Summary:
It is always preferable to obtain a dedicated POTS phone line from the Local
Exchange or Central Office, nothing is better than keeping it simple. The simpler
the installation the less there is to go wrong, and the quicker faults can be
rectified. It is common sense, not rocket science.
If you have any doubt about a line being a digital or analogue line, plug your own
normal phone into the line first. If the phone works correctly, the line is a POTS
line. If the phone does not work correctly, something is not quite right and further
investigation is required.
Support Tip:
The
T
ieline
USA POTS test number 317 913 6911, and the
codec’s Line Quality Display is there to help you test your codec. If you need any
assistance in setting up your codec, you can contact us at support@tieline.com
