Section 15: Operation of your Codec
T
ieline
Page
113
T E C H N O L O G Y
15.18.2.
Selecting Connections and Dialling Using the Connections
Manager
To scroll through the state of codec connections when you are viewing the
main
Cxns
screen you can use
SOFTKEYS 2 & 3
. The
LCD
above these keys
is displayed as << and >>. Use these
SOFTKEYS
to scroll forward and
backwards through the connections available to select the one you want.
If you have more than one connection programmed into the profile you are
using, (i.e. you have programmed a redundant failover connection to connect
along-side your main connection - also programmed to be inactive unless
failover is initiated) all programmed connections will be dialed by the
Connection Manager when it is activated by pressing
START.
15.18.3.
The Display When Connected
If you connect successfully the connection should display as shown in the
following image. The elements of the screen are described in detail.
1
2 3
4
CXNS Bball Venue <<>>
IP1 Idle
Start << >> Menu
SOFTKEYS 2 & 3:
Used to scroll
forwards and
backwards through
the connections
available.
Arrow indicators
for menu scrolling.
CXNS Bball Venue<<>>
IP1 Connected Actv
E1:D1 203.36.205.163
Cxns << >> Menu
Connection
Status
Encoders &
Decoders being
used.
IP address (or
POTS/ISDN
number) of the
current connection.
