Section 15: Operation of your Codec
T
ieline
T E C H N O L O G Y
Page 123
Menu
Submenu
Secondary
Submenus
Secondary
Sub-menu
Options
Description of Secondary Submenu
Options
Additional
Options
Description of Additional Options
Enable
Enables routing.
Route PhIn to
ChOut
Routes POTS and GSM voice calls to a
codec’s analog outputs.
Disable
Disables routing (Default).
Enable
Enables balanced mono output.
Aux Out (HP1
Bal)
The codec’s 1/4” (6.5mm) headphone
output can be programmed to be a
balanced mono output.
Disable
(Default)
Disables balanced mono output,
enables auxiliary output.
Exit Menu
Exits this submenu and goes to the
Configuration
submenu.
EU-ETSI
If Switch Type is ETSI (UK, Europe,
Australia and most other countries)
JPN-NTT
If you are in Japan and your network is
NTT
KOR-KOR
If you are in the Korea
US-Nat
If switch type is National ISDN-1 and 2
US-DMS
If switch type is Northern Telecom
DMS100
Configuration
ISDN< Left
Setup
(and/or
ISDN>
Right
Setup).
Network
This menu selects the ISDN software you
wish to use The list of possible selection
items here depends on the ISDN
software type loaded into the ISDN
module in the codec you are using.
US-AT&T
If switch Type is AT&T Custom
Table continued on the next page…
