manualshive.com logo in svg

Tieline i-Mix G3, Main Operation Manual

The Tieline i-Mix G3 user manual is a comprehensive guide detailing the main operation of the product. You can easily download the manual for free from 88.208.23.73:8080, providing you with all the necessary information to maximize your experience with the i-Mix G3.

Share
Download
background image

                                                                                         Appendix 2: Software License 

T

ieline

 

 

T E C H N O L O G Y 

Page 345

 

 

Appendix 2.

 

Software License 

 

PLEASE READ CAREFULLY BEFORE USING THIS EQUIPMENT:  this End User 
License Agreement ("EULA") is a legal agreement between (a) you (either an 
individual or a single entity) and (b) Tieline Pty Ltd and/or Tieline Research Pty Ltd, 

("Tieline") that governs the use of any Software Product, installed on or made 
available by Tieline for use with your Tieline product, ("Tieline Software"), that is not 

otherwise subject to a written license agreement between you and Tieline or it's 
suppliers. The term "Software Product" means electronic software and may include 
associated media, printed materials and "online" or electronic documentation.  An 

amendment or addendum to this EULA may accompany the Product. 

RIGHTS IN THE SOFTWARE PRODUCT ARE OFFERED ONLY ON THE CONDITION THAT 

YOU AGREE TO ALL TERMS AND CONDITIONS OF THIS EULA.  BY INSTALLING, COPYING, 

DOWNLOADING, OR OTHERWISE USING THE SOFTWARE PRODUCT, YOU AGREE TO BE 

BOUND BY THE TERMS OF THIS EULA.  IF YOU DO NOT AGREE TO THESE EULA TERMS, 
YOU MUST NOT INSTALL, COPY, DOWNLOAD, OR OTHERWISE USE THE SOFTWARE 

PRODUCT; YOU MAY RETURN THE UNUSED SOFTWARE PRODUCT, ALONG WITH YOUR 

TIELINE HARDWARE (IF THE ELECTRONIC SOFTWARE IS INSTALLED ON YOUR TIELINE 

HARDWARE), WITHIN 20 DAYS OF PURCHASE TO YOUR PLACE OF PURCHASE FOR A 

FULL REFUND. 

1. GRANT OF LICENSE.  Tieline grants you the following rights provided you comply with all terms 
and conditions of this EULA: 

a. Use. You may use the Software Product on your Tieline unit.   You do not have the right to 

distribute the Product.  You may load the Software Product into Your Unit's temporary memory 

(RAM) for purposes of using the Software Product. 

b. Storage.  You may copy the Product into the local memory or storage device of Tieline Hardware. 

c. Copying.  You may make archival or backup copies of the Software Product, provided the copy 
contains all of the original Software Product's proprietary notices and that it is used only for backup 

purposes. 

d. Reservations of Rights.  Tieline reserves all rights not expressly granted to you in this EULA. 

e. Freeware.  Notwithstanding the terms and conditions of this EULA, all or any portion of the 

Software Product which constitutes non-proprietary Tieline software or software provided under 

public license by third parties ("Freeware"), is licensed to you subject to the terms and conditions of the 
software license agreement accompanying such Freeware whether in the form of a discrete 

agreement, shrink wrap license or electronic license terms accepted at time of download.  Use of the 

Freeware by you shall be governed entirely by the terms and conditions of such license. 

2. UPGRADES.  To use a Software Product identified as an upgrade, you must first be licensed for the 

original Software Product identified by Tieline as eligible for the upgrade. 

3.  ADDITIONAL SOFTWARE.  This EULA applies to updates or supplements to the original 
Software Product provided by Tieline unless Tieline provides other terms along with the update or 

supplement. 

4.  TRANSFER.   

a.  Restrictions.  You may not rent, lease or lend the Software Product or use the Software Product for 

commercial timesharing or bureau use. You may not sublicense, assign or transfer the license or 

Software Product except as expressly provided in the EULA. 
5.  PROPRIETARY RIGHTS.  All intellectual property rights in the Software Product and user 

documentation are owned by Tieline or its suppliers and are protected by law, including but not 

limited to Australian copyright, trade secret, and trademark law, as well as other applicable laws and 

international treaty provisions.  You shall not remove any product identification, copyright notices or 

propriety restrictions from the Software Product.  Tieline and its suppliers retain all rights not 

expressly granted. 
6.  LIMITATION ON REVERSE ENGINEERING.  You may not reverse engineer, decompile, or 

disassemble the Software Product, except and only to the extent that (a) the right to do so is mandated 

under applicable law notwithstanding this limitation or (b) it is expressly provided for in this EULA. 

7.  TERM.  This EULA is effective unless terminated or rejected.  You may reject or terminate it at any 

time by destroying the Software Product together with all copies, modifications, and merged portions 

in any form.  This EULA will also terminate upon conditions set forth elsewhere in this EULA or if you 
fail to comply with any terms and conditions of this EUAL.  You agree upon such termination to 

destroy the Software Product together with all copies, modifications, and merged portion in any form. 

Summary of Contents for i-Mix G3




































































































































































































































































































































































Reviews:

No comments

Related manuals for i-Mix G3

Ibiza sound MIX500 Manual preview
MIX500
Brand: Ibiza sound Pages: 14
M-Audio ProjectMix I/O Benutzerhandbuch preview
ProjectMix I/O
Brand: M-Audio Pages: 45
Yamaha TF-Rack Quick Manual preview
TF-Rack
Brand: Yamaha Pages: 28
Palmer PDUETTO Manual preview
PDUETTO
Brand: Palmer Pages: 2
Rolls MX153 MixMate Datasheet preview
MX153 MixMate
Brand: Rolls Pages: 1
Denver DJS-3010 Manual preview
DJS-3010
Brand: Denver Pages: 6
RNIB Duo-Comm 2 Manual preview
Duo-Comm 2
Brand: RNIB Pages: 9
ALLEN & HEATH SCEPTER Owner'S Manual preview
SCEPTER
Brand: ALLEN & HEATH Pages: 42
Orima ORS 688 BG Instruction Manual preview
ORS 688 BG
Brand: Orima Pages: 11
Behringer VINTAGE DISTORTION VD1 Quick Start Manual preview
VINTAGE DISTORTION VD1
Brand: Behringer Pages: 2
DV Mark Over Marker Owner'S Manual preview
Over Marker
Brand: DV Mark Pages: 8
Parkside PFMR 1400 C2 Operation And Safety Notes preview
PFMR 1400 C2
Brand: Parkside Pages: 55
Power Dynamics PDV120S Instruction Manual preview
PDV120S
Brand: Power Dynamics Pages: 14
Zepter mixSy VO-022-K Instructions For Use Manual preview
mixSy VO-022-K
Brand: Zepter Pages: 10
LD LAX6 User Manual preview
LAX6
Brand: LD Pages: 110
MFB Clap-522 Owner'S Manual preview
Clap-522
Brand: MFB Pages: 2
MQ Multiquip EC62PH5 Safety Instructions preview
EC62PH5
Brand: MQ Multiquip Pages: 2
Laney CONCEPT 10 User Manual preview
CONCEPT 10
Brand: Laney Pages: 19

Brands by name

Popular brands

Load more brands