Section 15: Operation of your Codec
T
ieline
Page
98
T E C H N O L O G Y
Current Runtime
(
Current Runtime
stores non-permanent ‘runtime’ profile
amendments) with the use of the
MENU SELECTOR, KEYPAD
and
SOFTKEYS
.
Preset user profiles and matrices for several codec operations are supplied with
your
T
ieline
codec.
For more information in relation to these, please see the
sections titled
Manual Default Profiles
and
Matrix Editor
within this manual.
Matrices within profiles must be edited using
Tool
Box
. (Related Topic:
Profile
Editor
)
Connection Tip:
If you feel you need to check the audio, profile or connection
settings for either Manual or Connections Manager connections (over POTS,
ISDN, IP, X.21, 3G or GSM), please read through the Quick Start elements
within this manual. In this section codec menu structures are displayed - including
the
Audio
menu and all the wizard and remote control connection menus. For
more detailed information see the relevant menu sections within the
Tool
Box
section of this manual.
15.8.
Getting Started
When you power up the codec the backlight on the
LCD SCREEN (LCD)
will be
illuminated instantly, confirming that power is reaching the codec. Wait for about
15 seconds for the unit to start up and load the operating software and complete
its pre-flight checks. During this time various screens will be displayed. These
screens may include:
The Codec Initialization screen;
A screen displaying if the codec is in IP demo mode;
Whether the software is a Beta release; and
The main codec connection screen.
When the codec powers up it will always display the currently loaded profile at
the top of the screen.
15.9.
The LCD Screen on Initial Powerup
When your codec is delivered from the
factory, the
LCD
after the initial start-
up procedure will display the screen as
shown
13
. You will also note that the
manual default profile factory setting is
Man Dflt Mono Pgm
. The menu screen
displayed has only the onboard POTS connection and the codec phone
connection displayed.
Depending on the communications module options that you have purchased
from
T
ieline
,
and installed in your codec, the connections available to you will be
displayed on the
LCD
.
13
Depending on what module you may have installed.
ManDflt MonoPgm
[POTS1^ Enter# ]
PHONE Enter#
Aud Profile Wiz Menu
