113
© Tieline Pty. Ltd. 2015
Genie Distribution User Manual v1.6
Answering Calls from Non-Tieline POTS Codecs
Select the
Sessionless Only
check-box when only non-Tieline codecs are dialing a Tieline codec
over POTS. This allows you to choose the default encoding setting and
Route
the incoming call to a
nominated audio stream via a corresponding
Answer Route
in the answering codec program if
required.
Important Note:
Select
Other
in the
Encoding
drop-down menu when connecting to
Comrex® Vector, Matrix® and BlueBox® codecs. On the Comrex codec select its
"Music" algorithm. Please note that 9.6kbps connections are not supported by the
Comrex codecs.
Dial and Answer Route Settings in Programs
Dial Route
and
Answer Route
tags allow you to associate a POTS
Config
with a particular
incoming audio stream from either Tieline or non-Tieline codecs.
In principle, this operates similarly to how audio ports are used to route multiple audio streams over
IP. Selecting different IP audio port numbers allows users to define which incoming IP audio stream
is routed to a specific answering audio stream configuration on the codec. This ensures inbound
calls from multiple codecs can be consistently routed to the same answering audio streams, and
therefore the same inputs and outputs.
This is not necessary in simple point-to-point POTS audio stream configurations, however it is very
useful in multiple audio stream codecs which support POTS connections. When dialing Tieline to
Tieline over POTS using the Merlin or Genie family of codecs, you can configure a
Dial Route
in the
dialing codec's program and a corresponding
Answer Route
in the answering codec's program. This
will ensure a particular audio stream is routed between two codecs consistently.
