130
Genie Distribution User Manual v1.6
© Tieline Pty. Ltd. 2015
Sessionless
as the
Session Protocol
, the
Session Port
is not configurable
and you can manually configure the
Send Audio Port
and
Return Audio
Port
.
Session Port 9002
and
Send Audio Port 9000
are used by default for the first IP audio
stream. The audio for this audio steam will use analog or digital input and output 1 for
both the dialing and answering codecs. If you need to change default port settings on the
codec from which the call originates, this will also need to be adjusted in the answering
codec using a custom program.
Click
Save Program
to save the program with the default algorithm, jitter and FEC
settings which are physically entered in the codec. Alternatively, click
Next
to specify
individual algorithm, jitter buffer and FEC settings and configure a backup connection or
SmartStream PLUS for this audio stream (recommended).
Click the drop-down arrows on the right-hand side of each text box to adjust the
Encoding
,
Sample rate
or
Bit rate
options.
For IP connections click to configure:
·
Auto Jitter Adapt
and the preferred auto jitter setting using the drop-down arrow
for
Buffer priority
, or
·
Fixed Buffer Level
and enter the
Jitter Depth
, which must be between 12ms and
5000ms depending on the algorithm you select.
·
Local
and
Remote FEC
settings if required.
Click the check-box to select
Enable Redundant SmartStream PLUS
and configure
