241
© Tieline Pty. Ltd. 2015
Genie Distribution User Manual v1.6
It is possible to save up to four different
ISDN Answer Configs
, which allow up to 4 ISDN B
channels to be individually configured for unique answering behaviors. ISDN answering can be
configured to suit:
·
Hardware available in the codec, i.e. the number of B channels available.
·
Expected dialing behaviors, e.g. if B channels should bond or not, and whether audio streams
need to use
Dial
and
Answer
Route
tags.
·
The type of call being received by the codec, e.g. Tieline (with Tieline Session Data) versus
non-Tieline sessionless calls.
·
The algorithm expected when receiving sessionless calls.
Each of the four available
Configs
allows you to select which B channel or channels are used to
answer a call or calls from incoming ISDN codecs. A maximum of up to 4 B channels can be
selected if 2 ISDN modules are installed in the codec.
Important Note:
B channels can only be selected once and are greyed out once they
have been selected in one of the four ISDN
Configs
.
Single B Channel Config
To use a single 64kbps B channel for a connection (e.g. a 1 x Mono Peer-to-Peer audio stream):
1. Click the
Edit
button to configure settings.
2. Select a B channel from those available and then click
Save
.
Unbonded Only
is the default
