275
© Tieline Pty. Ltd. 2015
Genie Distribution User Manual v1.6
4. Check the
Rule summary
and click
Create Rule
to save the settings.
Rule 3: Synchronise Local Control Port Input Status with a Remote Relay
Output
Use this rule allow a local codec's control port input to change the state of a remote relay output.
1. Click the third rule in the
Rules panel
titled
Synchronise a local input to a remote relay
.
2. Click the drop-down arrow to select the local control port input used to control a remote relay
output.
3. Check the
Rule summary
and click
Create Rule
to save the settings.
Rule 4: Toggle a Relay Output with each Change in Connection Status
This rule is used to toggle a codec's control port relay output each time a program connects and
disconnects.
1. Click the fourth rule in the
Rules panel
titled
Toggle a relay based on a connection's
status
.
2. Click the drop-down
Relay
arrow and select the relay output you want to toggle.
3. Click the drop-down
Program
arrow to select a specific program which will affect the relay
toggle function, or use the default setting whereby any program will toggle the relay output.
4. Check the
Rule summary
and click
Create Rule
to save the settings.
