Tieline TLR5200 User Manual Download

Page: 342 / 359

342

Genie Distribution User Manual v1.6

© Tieline Pty. Ltd. 2015

Open Source Info-ZIP license:

For the purposes of this copyright and license, "Info-ZIP" is defined as the

following set of individuals:

Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup

Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig,

Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van

der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George

Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian

Spieler, Antoine Verheijen, Paul von Behren, Rich Wales, Mike White

This software is provided "as is," without warranty of any kind, express or

implied. In no event shall Info-ZIP or its contributors be held liable for any

direct, indirect, incidental, special or consequential damages arising out of the

use of or inability to use this software.

Permission is granted to anyone to use this software for any purpose, including

commercial applications, and to alter it and redistribute it freely, subject to the

following restrictions:

1. Redistributions of source code must retain the above copyright notice,

definition, disclaimer, and this list of conditions.

2. Redistributions in binary form must reproduce the above copyright notice,

definition, disclaimer, and this list of conditions in documentation and/or other

materials provided with the distribution.

3. Altered versions--including, but not limited to, ports to new operating systems,

existing ports with new graphical interfaces, and dynamic, shared, or static

library versions--must be plainly marked as such and must not be misrepresented as

being the original source. Such altered versions also must not be misrepresented

as being Info-ZIP releases--including, but not limited to, labeling of the altered

versions with the names "Info-ZIP" (or any variation thereof, including, but not

limited to, different capitalizations), "Pocket UnZip," "WiZ" or "MacZip" without

the explicit permission of Info-ZIP. Such altered versions are further prohibited

from is representative use of the Zip-Bugs or Info-ZIP e-mail addresses or of the

Info-ZIP URL(s).

4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," "WiZ,"

"Pocket UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases.

This software consists of voluntary contributions made by many individuals. For

exact contribution history, see the revision history available at

https://

github.com/jquery/jquery

The following license applies to all parts of this software except as documented

below:

====

Permission is hereby granted, free of charge, to any person obtaining a copy of

this software and associated documentation files (the "Software"), to deal in the

Software without restriction, including without limitation the rights to use, copy,

modify, merge, publish,

distribute, sublicense, and/or sell copies of the Software, and to permit persons

to whom the Software is furnished to do so, subject to

the following conditions:

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,EXPRESS OR IMPLIED,

Summary of Contents for TLR5200








































































































































































































































































































































































Search results

Summary of Contents for TLR5200

Reviews:

Related manuals for TLR5200

Brands by name

Popular brands

Tieline TLR5200, User Manual

Search results

Summary of Contents for TLR5200

Reviews:

Related manuals for TLR5200

Brands by name

Popular brands